The temperature sensor for the heating

Heating boiler thermostat: classification, operating principles and features of the installation

Today thermostat (aka - the thermostat) is considered as much a part of independent heating, as well as the boiler with radiators.

Available in different versions of the device, and to choose the most suitable, the user should carefully examine their product range.

That's about it, as well as how to install and how much is the thermostat for heating boiler, will be discussed in this article.

The desired value of this temperature, the user must specify in any way provided for construction of the instrument.

In operation, thermostat with temperature sensor compares incoming data with the settings and results of the comparison generates a user input signal to the boiler control system, thereby starting it to work on or off.

As you know, due to constant changes in the air temperature outside the heat transfer of the heater also has to adjust all the time.

If you keep it on the same level, while warming in the house would be too hot, and in the bitter cold - cold.

In earlier times, adjustment had to deal with the user, but now this function took over the thermostat. Through automation, the temperature in the heated space at any weather remains in a comfortable range.

Digital thermostat Viessman

The main characteristic of the thermostat is the threshold. For most models, it is 0.25 degrees. That is, as soon as the temperature in the room will be a quarter of a degree below a user-defined, the unit will react and turn on the boiler.

Apart from the fact that the thermostat frees the user from the worries associated with the configuration of the heating system, it allows you to win the following:

  • due to timely disable the boiler fails drastically reduce the consumption of electricity or gas (savings - up to 30%);
  • the risk of accidents due to overheating or freezing of the system is reduced to zero.

Since the thermostat does not allow the temperature to drop too much, the heat generator is always running in the power saving mode, so that its life is extended significantly.

thermostats family rather motley. First of all, they are divided into two groups:

These devices are mounted directly in the boiler, or near it, and their sensor monitors the temperature of the coolant in a "return pipe". Thermostats are built cheaper than others.

But they have a major drawback: because the air temperature in the heated room is not determined directly and indirectly (through the coolant), the unit always works with some delay.

Remote or room thermostat for heating boiler

In addition to the temperature sensor within the heating circuit, these thermostats have another - the air, which is installed in a heated room.

According to the advantages and disadvantages of these models are strictly opposed to embedded: have a higher price, but comfortable temperature is maintained at the highest possible accuracy.

Remote thermostats are available in two versions:

  1. The device is fully installed in the room and connected to the boiler by means of a long wire.
  2. The device consists of two parts: the sensor with radioizluchatelem installed indoors, and the controller with tuner - near the boiler, while connected to it via a short wire. Communication between the temperature sensor and the controller is carried out via radio.

The operating principle of all thermostats can be divided into the following types:

  1. analog: This is the simplest kind. the temperature sensor is based on changing the volume of the substance with increasing or decreasing temperature - it may be liquid in the flask (capillary sensor) or a combination of materials with different coefficient of thermal expansion (bimetallic strip). Analog thermostat is equipped with a mechanical knob to adjust the temperature, which is connected to a rheostat or variable resistor.
  2. Digital: as a temperature sensor used in such a device a semiconductor element that changes electrical resistance value with changes in temperature (a thermistor). Such elements are of two types: NTC and PTC. In the first resistance during heating is reduced, the second - increases. But the principle of the temperature sensor - is not the main difference between digital thermostats.

Unlike analog, digital devices equipped with a chip: it displays information about the work of the display mode and provides more opportunities for setting up the device.

For example, in the thermostats of this type usually has a programming function.

When compared with remote embedded thermostats, the latter should be considered definitely more preferred. Yes, they are more expensive, but do allow a smaller amount of gas than the built-in thermostats.

The latter, as already mentioned, some late and it therefore can not provide the operation of the boiler, and therefore the consumption of gas in the optimal range. Thus, the difference in price with the purchase of a remote thermostat soon pays for itself by saving gas.

Choosing between digital and analog thermostats must accurately assess their own financial capabilities. If funds allow, it is better to purchase a digital device. It is available in the programming function is extremely convenient.

Thermostat programmable room

You can, for example, specify the following settings:

  • on weekdays 7-30 am (when all members of the household go to work) to lower the temperature in the room to 18 degrees;
  • 17-00 (an hour before returning residents of the house) to heat the room to 24 degrees;
  • a day to maintain the temperature at 24 degrees around the clock.

Of course, buying a digital thermostat is not always feasible. If, for example, a user works at home (many now work via the Internet) and the requirements for the temperature regime during the day remain constant, it is wise to buy an analog-type device.

When used as an unprepared coolant water (not the last desalting procedure) in the heating circuit is better to set the analog temperature sensors, since the accuracy thermistors with scum fouling decreases strongly.

The choice of thermostat can be influenced by some circumstances not connected with the heating. For example, the repair stage.

If at the time of purchase of the device you are doing interior renovation or are planning something like this, it is advisable to purchase a remote thermostat with wired connection: cable can easily be hidden pave the way.

If the repair has finished, the hidden seal would be too expensive (in the house again have to arrange devastation), so the best choice would be a thermostat with radio. However, it should be borne in mind that the walls can sometimes interfere with the passage of the signal, so it is important to check before installing the quality of communication between the individual modules.

When choosing a device, you should pay attention to the various useful options. Very convenient to use thermostats are equipped with remote controls. And to those who are often faced with power outages, it makes sense to buy a model with a built-in batteries or powered by batteries.

To simplify the installation and configuration, choose the thermostat of the same brand as the boiler.

The remote thermostat mounted in any of the living rooms, usually the coldest (usually one of the corner), or the most visited, for example, in the living room. When installed in the kitchen, hallway or boiler, the device can not provide the correct operation of the heating system.

To readings were as objective as possible, it is necessary to minimize the influence of thermal noise.

These include:

  • Sun rays;
  • drafts;
  • thermal influence from home appliances or heating radiators.

Do not forget that the cold air settles down, whereas the heat rises to the ceiling.

Therefore, the thermostat should be placed as low as possible. Also, you should avoid installing it in a confined space, such as behind the curtain, or in the narrow gap between the pieces of furniture.

To know exactly where the boiler is located terminals for connection of the thermostat and other equipment, should carefully examine its datasheet and user manual. There you are wiring diagrams and recommendations relevant for this particular model of boiler.

Installation and connection of the completion of the thermostat must be configured. The procedure is set out in the instructions to the device. At this stage thermostat memory such data are entered:

  1. The desired temperature.
  2. The allowable temperature drop. If, say, at a set temperature set at 23 degrees difference of 2 degrees, the thermostat will include at 22 degrees the boiler on and off at 24-x.
  3. Trip delay.

With the last setting device will not react every time he, for example, a short time will be a draft or cast out by something hot.

The thermostat allows you to regulate the temperature in the room. Thermostat infrared heater - a device and connect to the heater, as well as an overview of the prices of the instruments.

What is the wall gas boiler is better in terms of price - quality, read here.

And in this topic http://microklimat.pro/otopitelnoe-oborudovanie/kotly/gruppa-bezopasnosti.html you know what a boiler safety group, which performs the functions of the device and how to correctly install.

For a model with decent features and capabilities will have to pay a few thousand.

Consider a few examples below thermostats models and give their approximate cost.

Thermostat Campini Corel TY90 C2

Mechanical thermostat for heating boiler. Device with mechanical type remote setting. The boiler is connected via a cable.

The device can be set to a temperature in the range of 5 to 35 degrees in increments of 0.1 degrees.

Price: 800 - 900 rubles.

Programmable thermostat Regulus LT08 LCD

Digital device for remote boiler type of heating with the possibility of programming.

Connects to the boiler through a cable (limiting length - 50 m).

In memory's new product already contains 8 preset programs, it is possible to add the same amount of its own.

During the thermostat takes into account the evidence, not only of its own temperature sensor, but also the one that is installed in the heating boiler.

temperature range - from 0 to 40 degrees in increments of 0.5 degrees. Default in standard mode supports 25-degree temperature in the economy - 16 degrees.

The power source is a set of three "AA" batteries.

Approximate cost: 1600 - 2000 rubles. (25 - $ 30).

Thermostat IntelliComfort CH140 GSM

More advanced representative of the group of digital thermostats for heating boiler. Remote unit (temperature sensor) "talks" with the boiler installed at the base by radio. It can also be connected to the air conditioning and other refrigeration equipment.

Temperature range - -35 to +60 degrees.

Control the operation of the thermostat is possible with the help of SMS-messages sent by mobile phone.

With the included software, designed for installation both on iPhones and smartphones running Android.

Price: 18.8 thousand rubles.. ($ 290).

radiator that heats constantly at one level, is not always convenient. After all, the room temperature changes and can become too hot, then turn down the heating is desirable. Thermostat for heating radiator helps maintain the temperature in the house at a comfortable level.

Recommendations for choosing a gas boiler for heating private houses, read this topic.

Great article, very instructive for a beginner, thank you!

Thermostats with room sensor - how to choose the mechanical and electronic for the house or a sauna

Heating homes, apartments, offices and other facilities is an important task, whose solution requires a competent and thorough approach. Often used for this purpose different gas and electric heaters with built-in automatic control functions. For this, use temperature controllers to air temperature sensor (thermostat), a built-in electric external or option which has recently become increasingly popular.

What thermostats with air temperature sensor

Thermostat (aka thermostat) having a temperature sensor in the room, a special controller, which is an essential part of the heating control device. The main task of the device is to support the coolant temperature at a specific level for cooling or heating. In most cases the desired temperature setting is made manually, whereupon the thermostat automatically controls the operation of the boiler or the convector.

Sometimes thermostat is part climate equipment, for example electric boilers, air-conditioners. He is, first of all, you need to increase the comfort level. Due to the temperature controller do not need to constantly disconnect and turn on the boiler, measuring changes in temperature in the room - all described functions are performed by the device automatically. In addition, it is necessary to:

  • Security software. If the boiler is for some reason did not shut down after the automatic control signal or overheating occurs, the thermostat will notify the owner about it with the help of sound.
  • Savings. The thermostat can save on heating and cooling system by controlling the air temperature, due to which decreases the consumption of gas or electricity.

Mechanical or electronic temperature regulator via boiler thermostat collects information about the current temperature indicators directly in the coolant. Room sensors thus measure the inside of the room. Then, the collected information is sent to the control unit device or on an automatic controller for storage and use. After verification of indications received from sensor controller in accordance with settings either reduces or increases the temperature of the boiler. He turns off the heating system as required.

Types of thermostats with air temperature sensor

thermostats are used to maintain the desired temperature, which the principle of operation is divided into electronic and mechanical. The first receive information due to built-in thermometer, and the second - thanks to the expansion of the bimetallic plates. Depending on the material bimetallic sensors are made of reinforced plastic. In addition, they are divided into remote and built. By way of control of the temperature range is isolated:

  • the control of air sensor;
  • with the control of the floor sensor;
  • combined.

Thermostat with remote temperature sensor

Modern thermostat with temperature control can be designed for incubators, infrared heaters, "Heated floor" systems, etc. Some modifications are equipped with a touch screen display and bright backlight. Considerable distribution acquired thermostats with remote sensor, which are a type of indoor devices. Use them to control the heating devices. A good buy may be:

  • model name: National comfort TR 721;
  • price: 4220 p .;
  • characteristics: type - electronic, power - 3500 W, for floor heating, the range - 5 .. + 35 ° C;
  • pros: programmable, cheaper analogues;
  • cons: relatively small temperature range.

When planning to purchase thermostat with temperature sensor type remote read electronically to another embodiment. Programmable thermostat for underfloor heating:

  • model name: THERMO Thermoreg TI-&50;
  • price: 6259 p .;
  • characteristics: type - electronic, power - 3600 W, the range - 5 .. + 40 ° C;
  • pros: programmable;
  • Cons: expensive.

Mechanical thermostat with remote temperature sensor are much cheaper electronic counterparts. However, they are not inferior to them in the design of the case:

  • model name: National comfort TR 111;
  • price: 2318 p .;
  • characteristics: power - 3600 W, the range - 5 .. + 45 ° C, mounting method - hidden;
  • pros: it is cheap, a good temperature range;
  • cons: no.

Properly selected thermostat helps regulate the intensity and the optimum operating temperature of the heating elements, for example, radiators. A convenient embodiment is an electronic programmable controller with a digital display timer. To save on buying it, take advantage of discounts, look for stores where they often run sales, stocks. Electronic thermostat for warm electric field sensor with integrated:

  • model name: Schneider Electric Unica MGU5.501.18ZD;
  • price: 4140 p .;
  • Characteristics: the network parameters - 230V, 50Hz, load - 10A, the temperature range of - 5 .. + 30 ° C, measuring accuracy - 0,5 ° C;
  • pros: relatively easy to install, durable faceplate;
  • Cons: a small range of adjustment.

Three-thermostat Valtec - wall-mounted indoor version with built-in sensor. The value of the adjustable parameter is set by adjusting the wheel:

  • model name: Valtec VT.AC602.0;
  • Price: 1 904 p .;
  • Characteristics: the adjusting range - +5 ... + 40 ° C, the degree of protection of enclosures - 20 IP, assembling a flush box;
  • advantages: low cost, good options;
  • cons: no.

The next option is perfect for adjusting and maintaining a constant temperature in the room. Changeover contact will help eliminate the simultaneous operation of heating systems and air-conditioning:

  • model name: Schneider Electric Unica T MGU5.501.12ZD;
  • price: 5170 p .;
  • Characteristics: the network parameters - 230 V, 50 Hz, Load - 10A, the adjusting range - +5 ... + 30 ° C;
  • advantages: simplicity and ease of operation;
  • Cons: a small temperature range.

On sale in Moscow, St. Petersburg and other cities, you can find dozens of modifications of temperature controllers fitted socket. A good choice can be a device with Novatek Elektro TP-12 voltage relay and sensor that plugs into a power outlet:

  • model name: Novatek Elektro TP-12;
  • Price: 1 720 p .;
  • Specifications: control range - -10 ... + 90 ° C, measurement error - about 1 ° C, minimum and maximum voltage - 120 and 320, the sizes - 122h61h76 mm;
  • pros: can be used in different places (incubators, greenhouses, living quarters, etc.), low cost;
  • cons: no.

Keep in mind that the installation of an external thermostat or other device of this type and further operation is required following certain guidelines. Another good buy:

  • Model Name: Sardo ST-0618;
  • price: 1995 p .;
  • Specifications: operating voltage - 220..230 V, 50 Hz, degree of protection - IP30, dimensions - 105h60h80 mm; weight - 134 g;
  • advantages: low cost, availability of LCD display;
  • cons: no.

The following construction is a single channel electronic thermostat with the socket. Suitable for controlling underfloor heating, convector heaters and infrared heaters:

  • Model Name: Sardo ST-0618;
  • price: 1970 p .;
  • Specifications: regulation limits - 0..30ºS (to within ± 1 ° C), the maximum load current - 16A, the degree of protection - IP20, dimensions - 124h57h83 mm; weight - 190 g;
  • advantages: the presence of an LCD display, an acceptable cost;
  • Cons: a small range of adjustment.

The indoor air temperature sensor

Temperature sensors in most cases are protected from external influences glass bulb, and the wire is coated with PVC insulation. Installed in the room thermostat to help regulate the temperature in the room in accordance with the preferences of all family members. Alternatively, look at the thermostat with air sensor and floor:

  • model name: Unica Basic 55 TH 0502RS;
  • price: 3100 p .;
  • Features: color - white, material - plastic, degree of protection - IP20 (for dry rooms), installation - built;
  • pros: a display;
  • Cons: low level of protection.

Order thermostat Aura, Grand or other brands with delivery by mail, you can in a specialized online store at any time. The indoor version of Siemens:

  • model name: Unica, Basic 55 TH 0502RS;
  • Price: 1 872 p .;
  • Specifications: measuring range - 0 to 50 ° C, accuracy - ± 0.8 ° C, protection rating - IP30, dimensions - 90h100h32 cm;
  • advantages: low cost, good quality;
  • cons: no.

RTF1 - embodiment for measuring temperature values ​​inside the room. Suitable for offices, apartments, warehouses and more:

  • model name: RTF1 S + S Regeltechnik;
  • Price: 1 324 p .;
  • Specifications: measuring range - -30 .. + 70 ° C, the degree of dust and moisture protection - IP30, assembling - on a flat surface;
  • pros: cost, functionality;
  • cons: no.

For wall installation with air thermostats used sensors that can be cut-and patch. Note the electromechanical device used as an automatic temperature controller in different rooms. It can be connected to an electric heating system:

  • model name: Eberle RTR-E 6121;
  • price: 950 p .;
  • Specifications: measuring range - 5 .. + 30 ° C, the connection - 3500 W, protection class - IP30, dimensions - 75h75h25,5 mm; weight - 0.1 kg;
  • pros: good defense, low cost;
  • cons: no.

A further embodiment for wall mounting is not less suitable for installation in a dry and indoors. Read more about the settings of another thermostat Eberle:

  • model name: Eberle RTR-E 6163;
  • Price: 1 100 p .;
  • Features: measuring range - 5. + 30 ° C, protection class - 30IP, dimensions - 75h75h25 mm; weight - 0.1 kg;
  • pros: reasonable cost, there is a key network outages;
  • cons: no.

RTR-E 6202 - a mechanical modification of the Eberle with indication of heating and the ability to connect an external timer. Conveniently located klemny number saves time in performing assemblies:

  • model name: Eberle RTR-E 6202;
  • Price: 1 692 p .;
  • Features: measuring range - 5. + 30 ° C, amperage - 10A dimensions - 75h75h26 mm;
  • pros: You can connect a timer;
  • Cons: is more expensive counterparts.

When using the electric sauna heating can connect another device - a temperature regulator, equipped with air gauges. At a set temperature indicators specific instrument will shut off the heating elements, and upon cooling they will be switched on again. This approach helps to save on payment for electricity:

  • model name: Ratar-02K;
  • price: 3926 p .;
  • Specifications: Measuring range - -40. + 125 ° C, nominal current load - 10A dimensions - 72h88h54 mm, weight - 0.4 kg;
  • pros: suitable for a wide range of instruments;
  • Cons: expensive cost.

The next device is also ideal for use in the sauna. It is designed for resistive load 20A by connecting voltage of 220V:

  • model name: T32M-02;
  • price: 3000 p .;
  • Specifications: measuring range - +50 .. + 150 ° C, load - 20A, there termoballon 280 mm in length;
  • advantages: simplicity, reliability;
  • Cons: somewhat pricey.

Note the analog control device. It is suitable not only for saunas and baths, but also control the operation of heaters in greenhouses, buildings, tanks, etc .:

  • model name: ART-18;
  • price: 1980 p .;
  • Specifications: measuring range - -40 .. + 140 ° C, load of execution relays (maximum) - 5, 10, or 16A (depending on the version), size - 90h50h70 mm;
  • pros: reasonable cost, it is suitable for many devices;
  • cons: no.

air temperature sensor with the relay is widely used for adjusting the temperature in a room with a floor heating system installed. Owing to choose the right device can make really comfortable environment. Thermostat with external air temperature sensor:

  • model name: Heat-Pro RTC-70;
  • Price 2099 p .;
  • Specifications: measuring range - 5 .. + 40 ° C, type - mechanical protection level - IP20, capacity - up to 3600 W;
  • pros: cost, good options;
  • cons: relatively low moisture and dust protection.

SE 200 - a device designed to control electrical heating systems, which include film heaters, heating mats, cable section. They provide management of temperature sensors and the floor:

  • model name: Teplolux SE 200;
  • price: 5422 p .;
  • Specifications: measuring range - 5 .. + 40 ° C, programmable, touch control, the degree of protection - IP21, dimensions - 9h9h4,1 cm;
  • pros: ease of operation, the presence of the LCD;
  • cons: relatively low protection is expensive.

Another type of electronic thermostat for floor heating. It is equipped with inner and outer temperature sensors:

  • model name: Heat-Pro S-603;
  • price: 2459 p .;
  • Specifications: measuring range - 5 .. + 45 ° C, a programmable type - an electronic load current - 16A dimensions - 8,6h8,6h0,9 cm;
  • advantages: the presence of an LCD display, an acceptable cost;
  • cons: no.

To control and maintain the temperature in the apartment or workplace with the help of turning the equipment off an excellent choice is the TR-1. This thermostat is suitable for convector, fan heater, fan, and other heating and cooling devices:

  • model name: DigiTOP TR-1;
  • Price: 1 999 p .;
  • Specifications: measuring range - -55 .. + 125 ° C, the degree of protection - IP20, dimensions - 11h6h4 cm;
  • pros: Connect directly to the socket, digital control;
  • cons: relatively low level of protection against moisture and dust.

Aura LTC 530 is a simple device that is suitable for adjustment and control of floor heating or a heater. It should be relatively inexpensive device:

  • model name: Aura LTC 530;
  • price: 2490 p .;
  • Specifications: regulation limits - - 5 + .. + 40 ° C, the degree of protection - IP20, dimensions - 8h8h4 cm; weight - 150 g;
  • advantages: easy operation, ultra-thin mounting portion;
  • Cons: low protection against moisture and dust.

Advantages of the next electronic controller are to design and ULTRA original refined design. Switch on the front panel, but there are ergonomic keyboard:

  • model name: Aura VTC 550;
  • price: 2790 p .;
  • Specifications: regulation limits - 5 .. + 35 ° C, the type of mounting - wall recessed dimensions - 8h8h 7 cm;
  • advantages: a large LCD display with backlight;
  • cons: no.

Device WiFi EVAN Climate ZONT-H2 is an excellent solution for control and adjustment of the electric or gas boiler. The apparatus is programmable and has a remote control:

  • model name: EVAN WiFi Climate ZONT-H2;
  • price: 7480 p .;
  • Specifications: regulation limits - -30 .. + 50 ° C, Programmable, Operating Voltage - 10-28 V, dimensions - 7,7h8,6h3,3 cm;
  • pros: easy configuration and management;
  • Cons: high cost.

Terneo RK - thermostat for the electric boiler with the sensor temperature D18-4. Is protected from internal overheating, it may be used to protect the water pipe from freezing and heating systems:

  • model name: Terneo RK;
  • Price 2530 p .;
  • Specifications: regulation limits - -55 .. + 125 ° C, load - 16 kW, 16A, razmery- 7h8,5h5,3 cm;
  • pros: ease of use, acceptable cost;
  • cons: no.

VT.AC614.0 thermostat has the ability to enable or disable any equipment that is responsible for maintaining the temperature and to carry out the boiler control. Read more about the device:

  • model name: VT.AC614.0;
  • price: 1800 p .;
  • Specifications: regulation limits - +17 .. + 90 ° C, the supply voltage - 220 V, 50 Hz, the switching current (maximum) - 3A;
  • advantages: low cost, fast installation;
  • cons: no.

There are many universal thermostats with sensors which determine the temperature of the air. The device of the Devi is suitable for controlling underfloor heating systems or complete. Through a special smart timer can be programmed for the specified time intervals:

  • model name: Devi Devireg 550 ELKO;
  • price: 5313 p .;
  • Specifications: regulation limits - 5 .. + 40 ° C, control - e, the degree of dust and moisture protection - IP30, dimensions - 85h85h47 mm; weight - 110 g;
  • pros: functionality, remote control;
  • Cons: high cost.

Universal thermostat Ratar-01 is cheaper previous device. It has fastening on DIN-rail and is applied in an integrated control different heating systems and devices:

  • Model name: 01-Ratar Relsib;
  • price: 2257 p .;
  • Specifications: regulation limits - -40 .. + 120 ° C, razmery- 72h88h54 mm; weight - about 400 g,
  • advantages: simplicity and ease of operation;
  • Cons: high cost.

A good universal embodiment for heating and cooling thermostat is from Spyheat. The device is mounted way open installation:

  • model name: Spyheat SDF-418H;
  • price: 1890 p .;
  • Specifications: regulation limits - 5 .. + 40 ° C, type - electronic, power - 3500 W, the degree of protection - IP20;
  • advantages: easy operation, low cost;
  • Cons: low level of protection.

How to choose the thermostats with air temperature sensor

To start, decide between the electronic and mechanical devices. The first option is more optimal and convenient, but if you are at home or in the office are intermittent problems with electricity, then give preference to a mechanical device. Next, pay attention to the limits of regulation, the method of installation (the simpler the better) and the degree of dust and moisture protection.

Especially thrifty buyers better to buy a programmable thermostat. This is due to the fact that a particular temperature regime is needed in the house around the clock. During business hours the premises are empty, so spend the money once in a programmable device, you save considerably on utility bills in the future. Weakening can be programmed heating, e.g., from 10 to 16 hours.

Reviews

Bought thermostat TR 515 from Teplolux. Optimal variant for stable operation temperature floor heating. The accuracy of maintaining the predetermined parameter is 0.5 degrees. Purchase cost is not so expensive - only 2,700 rubles. Is a function of self-diagnosis and protection of children. Deficiencies were found.

For heating systems ordered thermostat with a programmable touch controller SST SE 200. There is a remote sensor is mounted recessed installation method. I note a very convenient control and easy setup. Dust and moisture protection is not so high - only IP21, so I think this is a disadvantage. It should be a little expensive device.

A brief search led me to a device Teplolux TR 520. The thermostat has a modern appearance, a large display and good technical parameters. After purchasing it turned out that the device does not turn off the system "warm floor" in the "End Call" mode. In addition to the poorly functioning firmware omissions of note is not very good build.

Existing temperature sensors for heating

Temperature sensors are needed to convey information about the current state and the current coolant temperature controlled facilities. Data from the sensors are sent to the controller which processes the information received and generates a control signal for adjustment of the heating boiler.

All temperature sensors for heating, which are used to control loop current state, are separated into 2 types. In principle, the full control of the heating system will provide any of them, the difference is in the use of various design solutions and data transmission method.

information transmission methods are divided into the following types:

Wire temperature sensors for heating, and it is apparent from their names, the data is transmitted to the controller via wires routed from the sensor to the control unit of the boiler. High-tech wireless sensors transmit information by using radio wave transmitter and receiver. Approximately as working router WiFi.

Temperature sensors according to the method of their placement are divided into these types:

  1. Overhead sensors - are fastened to the pipes of the heating circuit;
  2. Submersible sensors - are in constant contact with the coolant;
  3. room sensors - are located indoors;
  4. external sensors - are placed outside the heated rooms.

How long should the thermal sensors for heating?

If the conventional heating circuit is used, only one room temperature sensor for a gas boiler, that can be multiple heating with radiation collector circuit of such sensors. In this case, temperature control takes place for each room individually. Heating temperature sensor located in each room, sends the information to the controller, which, via the control unit controls independent flow of coolant from the reservoir to the desired premises to maintain the set temperature. For more details about automatic boiler can be read in our article "The existing equipment for heating boilers."

Visual temperature monitoring

To control the temperature of the coolant, the temperature inside and outside of the heated space temperature sensors are of different types. For visual monitoring of the majority of room thermostats are equipped with displays, on which the current value of the room temperature. The temperature measuring devices that are installed on boilers, also provides the possibility of visual control.

For heating systems are used these types of thermometers:

  • Liquid thermometers. They are used for monitoring and measuring the temperature indoors and outdoors.

The solid fuel fired boilers are sometimes used for heating liquid thermometer, bimetallic temperature but the indicators used in modern units.

Faults gas boiler associated with temperature sensors

Reasons that cause a failure or intermittent operation of the gas boiler lot. In each case it is necessary to deal specifically.

The basic malfunctions of gas boilers are:

  1. the boiler does not start;
  2. attenuation burner;
  3. Gas boiler does not reach the temperature;
  4. the boiler is not disconnected.

Can these faults occur due to failure of temperature sensors? You may, and in the search for the causes of the temperature sensor failure, their chain, transmitter and receiver for wireless systems need to check the first. We can not exclude the following options:

  • The boiler has shut down and is not included. One of the probable causes of failure or scorching temperature sensor switch relay. In complex systems with electronic sensors and controllers often there is a fault in the control unit.
  • Fault - attenuation burner, may have many causes, but one of them - the temperature sensor failure, which causes the main burner off.
  • The reason insufficient heating the coolant may be premature shutdown of the boiler due to incorrect installation or temperature sensor malfunction.
  • If zalipnet mechanical temperature sensor relay or failure occurs in the electronic unit or a temperature sensor, such a failure is quite likely.

Thermostats (more details of which can be read here) together with controllers, and control units maintain a constant temperature, which contributes to fuel economy and reduce heating costs. Temperature sensors allow completely automated control of heating process and ensure its durability and safety.

All rights reserved and protected by law

Any violation of copyright has legal responsibility. Contacts

Leave a Reply

Your email address will not be published. Required fields are marked *

− 2 = 7